Wooden Rose

 Made from planed pine shavings, wood turned vase and a chopstick.

The inspiration behind this piece was that I'd made the vase at a wood turning class so I thought it would be a good idea to make a rose to fit it and hand it to my grandparents as a Christmas present.

Kitchen Archway

This is the archway made from MDF for my grandparents kitchen. My Grandad cut the MDF out and I applied the silk emulsion finish.

iPod Docking Station (GCSE project)

Unfortunately, this is the only image I currently have of my iPod docking station that I built and at this stage it wasn't quite complete, the blue acrylic was to be polished and the front drawer needed a handle. To make up for this I have included a 3D CAD model of this product (below).
Hold Shift + Drag to pan
Drag to rotate
Mouse Wheel to zoom

12' Rowing Boat

I built this boat from plywood using the "Stitch and Glue" technique. What I did was attach all the panels of plywood (which I cut out using jigsaw) together with cable ties. I then used epoxy resin mixed with a filler to fill in the gaps where the timber joint. After that I used fibreglass + epoxy resin to permanently bond the join creating my boat. After that the same technique was used to built the interior then all I had to do was give the product the appropriate finish.